Reasons to Remove Bathroom Faucet Handles:
- If you’re going to replace it with another one
- If the cartridge inside require changing
- To clean the handle’s inside
- Look for where it’s leaking
- To change the filter
How to Remove a Bathroom Faucet Handle that Have No Screws But Has a Cap or Button:
Step 1: Locate the Cap or Button
Check around the faucet handle to locate the cap or button. It is usually on the side or top.
Step 2: Use a Flat Screwdriver to Pop Out the Button or Cap
While taking caution, insert the small, flat screwdriver inside the gap and work it slowly and gently around the edge until it unscrews or pops off. Kindly note that most faucet caps and handles come very delicate. If not handled with care, they can easily break. Fortunately, you can always order a replacement online or the nearest shop.
Step 3: Turn Off the Water Supply
It is necessary only when you are changing the cartridge.
Step 4: Remove the Screw
After popping out the cap or button, remove the screw inside. A wrench will do a great job. You may need to determine the screw’s size first to get the right wrench for the job. Screws are tiny and can go through the drain. Ensure you cover or close the drain before removing the screw to avoid losing it when it falls into the drain.
Step 5: Pull the Handle
When the screw comes out, pull out the faucet’s handle. If you can’t have it out with your plain hands, try using a pair of pliers or faucet handle puller. Pliers can scratch your faucet’s handle if applied directly. Wrap an old cloth or towel around the handle’s base then use the pliers.
After removing the handle, you may find some mineral deposits. Use distilled white vinegar or lemon to get rid of them.
How to Remove Double Faucet Handles without Screw:
Step 1: Turn Off the Water
For this method, turning off the water under the sink is a safety precaution
Step 2: Twist the Handle’s Base
While holding the faucet’s handle arm in place, rotate its base counterclockwise, and remove it.
Step 3: Remove the Screw
After removing the faucet’s base, remove the screw inside. Hold the underneath centerpiece and use a screwdriver.
Step 4: Pull Out the Cartridge
After the screw is out, you will see a white cartridge underneath. Remove it using nosed needle pliers and replace them. Unfortunately, many people have expressed frustrations while removing cartridges using pliers. To avoid such, buy new bathroom sink faucets from renowned brands like Delta and Moer. Such brands offer full support in case of a problem, and you will always get the replacements you need.
How to Remove a Bathroom Sink Lever-Style Faucet Handle with No Screws or Cap:
Step 1: Remove the Button
The faucet handle’s front side contains cold and hot buttons. Grab a flat head screwdriver and carefully apply pressure to the buttons’ edges. The buttons are very fragile, requiring you to get extra careful when removing or handling them. Because of the buttons’ size, they can smoothly go down the drain. Ensure to cover your drain before transferring them to avoid losing them down the drain.
Step 2: Remove the Allen Key
After removing the button, you will find an Allen Key, not a screw! Therefore, you require an Allen wrench to have the key out.
Step 3: Pull off the Faucet Handle
Once the Allen key is out, you need to lift the bathroom sink faucet handle to remove it. But some faucet contains cartridges. In case yours has, you will need to expose the cartridge’s top by unscrewing its top piece. But if there’s no cartridge, removing the Allen key takes you to the actual faucet where the water comes through.
Step 4: Expose the Cartridge
When the Allen key is gone, you will find a gold-colored piece if the sink faucet has a cartridge. Remove it by screwing it using your hands. If hard to do so, tie it around with an old towel and use a wrench to remove it. The towel will protect the gold-colored piece from getting scratched or damaged by the wrench.
If you can afford a new cartridge, it is better to replace your old one with a new one instead of taking your old cartridge apart and replacing the tiny pieces. Cartridges do not work well when taken apart. If they do, it’s only for a short while. The only solution is to install a new one.
Bathroom faucet handles come in various styles and designs. Though their purpose is to secure the faucet and help pass water through, they also come with cosmetic purposes. Sleek faucet handles improve the appearance of the sink and room, and are pleasing to the eyes. Because of their versatility, removing their handles without screws could be different for each, as discussed in this article.
For optimal results of removing your screw-free bathroom faucet handle, ensure to know the kind of handle you’re dealing with and come up with a plan. Then choose the proper method to remove your bathroom sink’s faucet handle.